ENVIRONMENTAL TESTS
MADE EASY
HEAT – COLD – CLIMATE
We can perform IEC 60068 compliant climate tests in the range of:
- Temperature tests from -70°C to +250 °C
- Dew point tests from -3°C to 94°C
- Climate tests: 10 % r.F up to 95 % r.F / +10 °C up to +90 °C
- Rapid temperature change with a rate up to 11°C/min.
Testing Equipment:
- Temperature Chambers: -70 °C up to +250 °C
- Climate Chambers: -70 °C up to +180 °C
- Heat/Cold/Climate Test Cells : -40 °C up to +90 °C
- Heat/Cold/Climate Test Cells: -75 °C up to +90 °C
- Heat/Cold/Climate Test Cells: -40 °C up to +80 °C
THERMAL SHOCK
We can apply fast change of air temperature (thermal shock) to materials, electronics, components or devices.
Testing Equipment
- Freely programmable sample exposure time.
- Unlimited number of test cycles.Two test chambers:
- High Temperature Chamber up to +220 °C
- Low Temperature Chamber down to -80 °C
- Transfer time:< 10 sec.
- Automatic sample transport
- Capacity/volume of the chambers: 47 x 65 x 41 cm
- weight of sample: 20 kg
SHOCK – VIBRATION
GTL can perform vertical or horizontal vibration tests.
Testing Equipment
- Electrodynamic shaker force: 35585 N
- Single and steady shock
- Mass will depend on acceleration and duration:
- g. 232kg @ 30g for 6ms.
- Feel free to forward your DUT specification.
IP PROTECTION CLASS – WATER & DUST
GTL can perform rain tests for IP classification as well as sand and dust blowing for all degrees of protection for enclosures.
- Testing Equipment
- Water Protection Tests:
- spray water
- dripping water
- water jet propulsion
- steam jet propulsion
- (Talcum) dust chamber